DG Series Digital Camera Drivers and Utility Programs Version 2.01 ------------------------------------------------------------------ This CD contains the drivers and utility programs for the digital camera. System Requirements: - Pentium class 166MHz or faster processor - 32MB memory - USB port - 16-bit (or higher) color display - CD-ROM drive for software installation - 100MB free hard disk space - Windows 98/Me or Windows 2000 This camera requires Windows with USB support. Windows 95 and Windows NT are not supported. --------------------------------- Starting the Installation Program --------------------------------- Note: Please run the Installation Program before you connect the camera to the computer. If you connect the camera to the USB port before the drivers are installed, an Add New Hardware Wizard dialog box will appear and prompt you for the device driver. Please select cancel to exit. To start the installation program, click the Start button then click Run. Enter: d:\setup where d: is the drive letter of your CD-ROM drive. Click the OK button. Follow the on-screen instruction to complete the installation. If there are messages prompting you to insert disk, please refer the path to: c:\windows\twain_32\MyDSC\sqcamd.sys c:\windows\twain_32\MyDSC\sqcaptur.sys -------------------------------- Uploading Pictures by the My DSC -------------------------------- 1. Launch the [My DSC] on Desktop, select My DSC. 2. The Photo's main window appears, click the Download Photos icon. -------------------------------------- Uploading Pictures by the TWAIN driver -------------------------------------- TWAIN is the industry standard protocol that allows external image devices to communicate with your imaging software. 1. Launch the TWAIN-compliant program (e.g. Imaging). 2. Select [select scanner] from the File menu. 3. The Select data source box appears. Choose [Dual-Mode DSC(2770)] and click the Acquire button. 4. The Photo's main window appears, click the Download Photos icon. 5. Now you may transfer camera images directly into Imaging for viewing / editing OR save images directly to disk. ---------------- Capturing Videos ---------------- 1. Launch the [My DSC] on Desktop, select PCCam. 2. The PCCam's main window appears and you can click Preview in the Option tool bar to preview or click Capture in the Capture tool bar to Start capturing video. ---------------- Videoconference ---------------- 1. Launch the NetMeeting application if you have installed it. A. To check if you have installed NetMeeting. a. Click [Start] b. Click [Programs] c. Click [Accessories] d. Click [Communications] or [Internet tools] e. Click NetMeeting B. To check if [My DSC] wdm driver was successfully installed. a. Open [Device Manager] b. Find [Imaging Devices] c. Select [Dual-Mode DSC(2770)] then check "Properties" d. Check whether the Device Status is "This device is working properly". e. If not, try step 1 again. 2. To run other videoconference programs, the [My DSC] wdm driver must successfully installed. ------------ User's Guide ------------ User's Guide of the camera at PDF format is at folder \manual of this CD. You need the Acrobat Reader software to read those manuals. If your system do not have such software, go to folder \acrobat reader to install it. End of file