Mito Digital Camera Drivers and Utility Programs Version 2.00
-------------------------------------------------------------

This CD contains the drivers, utility programs and bundled software for the digital camera.


System Requirements:
- Pentium class 166MHz or faster processor
- 32MB memory
- USB port
- 16-bit (or higher) color display
- CD-ROM drive for software installation
- 300MB free hard disk space
- Windows 98/Me or Windows 2000/XP

This camera requires Windows with USB support. Windows 95 and Windows NT are not supported.


---------------------------------
Starting the Installation Program
---------------------------------

Note: Please run the Setup Program before connecting the camera to the computer. If you connect the camera to the computer before the drivers are installed, an Add New Hardware Wizard dialog box will appear and prompt you for the device driver. Please select Cancel to exit.

The installation program starts automatically when you insert the CD. Follow the on-screen instruction to complete the installation.

To start the installation program manually, click the Start button then click Run. Enter: 

d:\setup

where d: is the drive letter of your CD-ROM drive. Click the OK button. 

Select camera model and follow the on-screen instruction to complete the installation.


----------------------------------------------------
Installing DC338F, DC339F and DS1300F for Windows XP
----------------------------------------------------

Please following the steps below if you are using the above models in Windows XP:
1. Complete the software installation as stated in the above section.
2. Power on the camera and connect it to the computer.
3. A Found New Hardware Wizard dialog box will appear. Select "Install the software automatically (Recommended)", insert this CD and press "Next".
4. Windows will complete the rest of the installation.


--------------
User's Manuals
--------------

After installation, User's Manuals of the camera (not available in DS688/DS688A) and the bundled software at PDF format will be copied to your system. You can also access those manuals at folder \manual under the camera folder and the folder \manual of this CD. You need the Acrobat Reader software to read those manuals. If your system do not have such software, go to folder \acrobat reader to install it.


End of file